The Hammer Strength Select Seated Leg Press is a fundamental part of the strength training progression. It has biomechanically sound positioning and pressing angles, and the maintenance-free, stainless steel rails offer smooth motion.
Cables :- 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications
Instructional Placards :- Easy-to-follow instructions illustrate proper use and muscles trained, Axis of rotation marked with red indicator to help cue correct alignment
Belts and Pulleys :- 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings
Cushioning :- Pads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability
Shrouds :- Standard rear shroud on SE models,Optional full front shroud on SE models
Weight Plates And Guide Rods :- Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings , 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss, Drop down incremental weight system (standard on SE models)
Adjustments :- Roller mechanism on seat adjustment provides smooth operation
Foot Platforms :- Polyethylene spray-coated for impact, corrosion, and abrasion resistance
Frame Description :- Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity
Hand Grips :- Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant
Dimensions (L x W x H) :-79 in x 40 in x 71 in (201 cm x 102 cm x 181 cm)
Weight :- 810 lb (368 kg)
Weight Stack Weight :- In Kgs 195 (390 lbs)

The Hammer Strength Select Seated Leg Curl is a fundamental part of the strength training progression. Adjustable back and thigh pads for better alignment and stabilization, and adjustable start position provides five different starting points.
Cables :- 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications
Instructional Placards :- Easy-to-follow instructions illustrate proper use and muscles trained, Axis of rotation marked with red indicator to help cue correct alignment
Belts and Pulleys :- 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings
Cushioning :- Pads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability
Shrouds :- Standard rear shroud on SE models,Optional full front shroud on SE models
Weight Plates And Guide Rods :- Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings , 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss, Drop down incremental weight system (standard on SE models)
Adjustments :- Roller mechanism on seat adjustment provides smooth operation
Foot Platforms :- Polyethylene spray-coated for impact, corrosion, and abrasion resistance
Frame Description :- Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity
Hand Grips :- Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant
Dimensions (L x W x H) :-55 in x 34 in x 55 in (140 cm x 87 cm x 140 cm)
Weight :- 515 lb (234 kg)
Weight Stack Weight :- In Kgs 138 (295 lbs)

The Hammer Strength Select Standing Calf is a fundamental part of the strength training progression. Nine pad height positions accommodate all users, and contoured non-slip foot plates allow users’ ankles to move in a full range-of-motion.
Cables :- 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications
Instructional Placards :- Easy-to-follow instructions illustrate proper use and muscles trained, Axis of rotation marked with red indicator to help cue correct alignment
Belts and Pulleys :- 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings
Cushioning :- Pads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability
Shrouds :- Standard rear shroud on SE models,Optional full front shroud on SE models
Weight Plates And Guide Rods :- Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings , 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss, Drop down incremental weight system (standard on SE models)
Adjustments :- Roller mechanism on seat adjustment provides smooth operation
Foot Platforms :- Polyethylene spray-coated for impact, corrosion, and abrasion resistance
Frame Description :- Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity
Hand Grips :- Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant
Dimensions (L x W x H) :-58 in x 45 in x 71.5 in (148 cm x 115 cm x 182 cm)
Weight :- 680 lb (309 kg)
Weight Stack Weight :- In Kgs 195 (390 lbs)

The Hammer Strength Select Seated Row is a fundamental part of the strength training progression. The overhead pivot creates a natural arc of motion, and multiple hand positions provide variety for mid- or upper-back exercises.
Cables :- 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications
Instructional Placards :- Easy-to-follow instructions illustrate proper use and muscles trained, Axis of rotation marked with red indicator to help cue correct alignment
Belts and Pulleys :- 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings
Cushioning :- Pads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability
Shrouds :- Standard rear shroud on SE models,Optional full front shroud on SE models
Weight Plates And Guide Rods :- Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings , 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss, Drop down incremental weight system (standard on SE models)
Adjustments :- Roller mechanism on seat adjustment provides smooth operation
Foot Platforms :- Polyethylene spray-coated for impact, corrosion, and abrasion resistance
Frame Description :- Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity
Hand Grips :- Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant
Dimensions (L x W x H) :-52 in x 34 in x 71 in (133 cm x 87 cm x 181 cm)
Weight :- 590 lb (268 kg)
Weight Stack Weight :- In Kgs 138 295 lbs)

The Hammer Strength Select Pectoral Fly is a fundamental part of the strength training progression. The arms pivot to accommodate various users, the built-in foot bar enhances user stabilization, and the five-position adjustable start mechanism is for individual range-of-motion preferences.
Cables :- 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications
Instructional Placards :- Easy-to-follow instructions illustrate proper use and muscles trained, Axis of rotation marked with red indicator to help cue correct alignment
Belts and Pulleys :- 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings
Cushioning :- Pads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability
Shrouds :- Standard rear shroud on SE models,Optional full front shroud on SE models
Weight Plates And Guide Rods :- Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings , 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss, Drop down incremental weight system (standard on SE models)
Adjustments :- Roller mechanism on seat adjustment provides smooth operation
Foot Platforms :- Polyethylene spray-coated for impact, corrosion, and abrasion resistance
Frame Description :- Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity
Hand Grips :- Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant
Dimensions (L x W x H) :-49 in x 56 in x 71 in (125 cm x 143 cm x 181 cm)
Weight :- 580 lb (264 kg)
Weight Stack Weight :- In Kgs 138 295 lbs)

The Hammer Strength Select Lat Pulldown is a fundamental part of the strength training progression. Thigh pads easily adjust to provide stability and comfort, and the straight-bar has angled ends to ensure correct arm and wrist positioning during workouts.
Cables :- 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications
Instructional Placards :- Easy-to-follow instructions illustrate proper use and muscles trained, Axis of rotation marked with red indicator to help cue correct alignment
Belts and Pulleys :- 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings
Cushioning :- Pads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability
Shrouds :- Standard rear shroud on SE models,Optional full front shroud on SE models
Weight Plates And Guide Rods :- Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings , 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss, Drop down incremental weight system (standard on SE models)
Adjustments :- Roller mechanism on seat adjustment provides smooth operation
Foot Platforms :- Polyethylene spray-coated for impact, corrosion, and abrasion resistance
Frame Description :- Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity
Hand Grips :- Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant
Dimensions (L x W x H) :-54 in x 33 in x 89 in (138 cm x 84 cm x 227 cm)
Weight :- 545 lb (248 kg)
Weight Stack Weight :- In Kgs 138 295 lbs)

The Hammer Strength Select Lateral Raise is a fundamental part of the strength training progression. Pad positions are optimized for middle deltoid stimulation, and pivoting handles accommodate users of all sizes.
Cables :- 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications
Instructional Placards :- Easy-to-follow instructions illustrate proper use and muscles trained, Axis of rotation marked with red indicator to help cue correct alignment
Belts and Pulleys :- 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings
Cushioning :- Pads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability
Shrouds :- Standard rear shroud on SE models,Optional full front shroud on SE models
Weight Plates And Guide Rods :- Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings , 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss, Drop down incremental weight system (standard on SE models)
Adjustments :- Roller mechanism on seat adjustment provides smooth operation
Foot Platforms :- Polyethylene spray-coated for impact, corrosion, and abrasion resistance
Frame Description :- Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity
Hand Grips :- Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant
Dimensions (L x W x H) :-42 in x 37 in x 55 in (107 cm x 94 cm x 140 cm)
Weight :- 535 lb (243 kg)
Weight Stack Weight :- In Kgs 95 (200 lbs)

The Hammer Strength Select Leg Extension is a fundamental part of the strength training progression. All adjustments are accessible from the seated position, and the adjustable start position provides five different starting points.
Cables :- 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications
Instructional Placards :- Easy-to-follow instructions illustrate proper use and muscles trained, Axis of rotation marked with red indicator to help cue correct alignment
Belts and Pulleys :- 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings
Cushioning :- Pads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability
Shrouds :- Standard rear shroud on SE models,Optional full front shroud on SE models
Weight Plates And Guide Rods :- Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings , 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss, Drop down incremental weight system (standard on SE models)
Adjustments :- Roller mechanism on seat adjustment provides smooth operation
Foot Platforms :- Polyethylene spray-coated for impact, corrosion, and abrasion resistance
Frame Description :- Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity
Hand Grips :- Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant
Dimensions (L x W x H) :-47 in x 41 in x 64 in (120 cm x 105 cm x 163 cm)
Weight :- 570 lb (259 kg)
Weight Stack Weight :- In Kgs 138 (295 lbs)

The Hammer Strength Select Leg Curl is a fundamental part of the strength training progression. Divergent angle between hip and chest pads minimizes lower-back stress, and adjustable start position provides five different starting points. The 22 pieces in the Hammer Strength Select line provide an inviting introduction to Hammer Strength equipment.

• Size (L x W x H): 65" x 39" x 55" (metric cm: 165 x 99 x 140)

• Recommended Live Area: 107" x 63" x 55" (metric cm: 272 x 160 x 140)

• Machine Weight: 475 lb (216 kg)

• Weight Stack(s): 200 lb (95 kg)

• Max User Weight: 300 lb (136 kg)

• Cables: 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications

• Instructional Placards: Easy-to-follow instructions illustrate proper use and muscles trained; Axis of rotation marked with red indicator to help cue correct alignment

• Belts and Pulleys: 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings

• Cushioning: Pads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability

• Shrouds: Standard rear shroud on SE models; Optional full front shroud on SE models

• Weight Plates and Guide Rods: Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings; 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss; Drop down incremental weight system (standard on SE models)

• Adjustments: Roller mechanism on seat adjustment provides smooth operation

• Foot Platforms: Polyethylene spray-coated for impact, corrosion, and abrasion resistance

• Frame Description: Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity

• Hand Grips: Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant

The Hammer Strength Select Hip and Glute is a fundamental part of the strength training progression. Combo machine with a bidirectional cam system that has immediate resistance pick-up for high-speed training.
Cables :- 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications
Instructional Placards :- Easy-to-follow instructions illustrate proper use and muscles trained, Axis of rotation marked with red indicator to help cue correct alignment
Belts and Pulleys :- 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings
Cushioning :- Pads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability
Shrouds :- Standard rear shroud on SE models,Optional full front shroud on SE models
Weight Plates And Guide Rods :- Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings , 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss, Drop down incremental weight system (standard on SE models)
Adjustments :- Roller mechanism on seat adjustment provides smooth operation
Foot Platforms :- Polyethylene spray-coated for impact, corrosion, and abrasion resistance
Frame Description :- Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity
Hand Grips :- Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant
Dimensions (L x W x H) :-65 in x 39 in x 72 in (166 cm x 100 cm x 183 cm)
Weight :- 725 lb (329 kg)
Weight Stack Weight :- In Kgs 138 (295 lbs)

The Hammer Strength Select Horizontal Calf is a fundamental part of the strength training progression. Force is transmitted through the hips to eliminate spinal compression, and the back pad is adjustable to fit all exercisers.
Cables :- 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications
Instructional Placards :- Easy-to-follow instructions illustrate proper use and muscles trained, Axis of rotation marked with red indicator to help cue correct alignment
Belts and Pulleys :- 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings
Cushioning :- Pads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability
Shrouds :- Standard rear shroud on SE models,Optional full front shroud on SE models
Weight Plates And Guide Rods :- Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings , 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss, Drop down incremental weight system (standard on SE models)
Adjustments :- Roller mechanism on seat adjustment provides smooth operation
Foot Platforms :- Polyethylene spray-coated for impact, corrosion, and abrasion resistance
Frame Description :- Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity
Hand Grips :- Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant
Dimensions (L x W x H) :-61 in x 32 in x 55 in (155 cm x 82 cm x 140 cm)
Weight :- 690 lb (313 kg)
Weight Stack Weight :- In Kgs 195 390 lbs)

The Hammer Strength Select Hip Abduction is a fundamental part of the strength training progression. The ratchet mechanism allows exercisers to adjust in 10-degree increments, and the kneepads and dual foot positions provide leg support around the knees.
Cables :- 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications
Instructional Placards :- Easy-to-follow instructions illustrate proper use and muscles trained, Axis of rotation marked with red indicator to help cue correct alignment
Belts and Pulleys :- 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings
Cushioning :- Pads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability
Shrouds :- Standard rear shroud on SE models,Optional full front shroud on SE models
Weight Plates And Guide Rods :- Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings , 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss, Drop down incremental weight system (standard on SE models)
Adjustments :- Roller mechanism on seat adjustment provides smooth operation
Foot Platforms :- Polyethylene spray-coated for impact, corrosion, and abrasion resistance
Frame Description :- Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity
Hand Grips :- Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant
Dimensions (L x W x H) :-61 in x 26 in x 55 in (155 cm x 67 cm x 140 cm)
Weight :- 575 lb (261 kg)
Weight Stack Weight :- In Kgs 138 (295 lbs)

The Hammer Strength Select Fixed Pulldown is a fundamental part of the strength training progression. Its defined path of motion is ideal for circuit training, and the angled seat and handgrips encourage proper exercise position.
Cables :- 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications
Instructional Placards :- Easy-to-follow instructions illustrate proper use and muscles trained, Axis of rotation marked with red indicator to help cue correct alignment
Belts and Pulleys :- 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings
Cushioning :- Pads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability
Shrouds :- Standard rear shroud on SE models,Optional full front shroud on SE models
Weight Plates And Guide Rods :- Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings , 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss, Drop down incremental weight system (standard on SE models)
Adjustments :- Roller mechanism on seat adjustment provides smooth operation
Foot Platforms :- Polyethylene spray-coated for impact, corrosion, and abrasion resistance
Frame Description :- Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity
Hand Grips :- Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant
Dimensions (L x W x H) :- 58 in x 55 in x 73 in (148 cm x 140 cm x 186 cm)
Weight :- 620 lb (282 kg)
Weight Stack Weight :- In Kgs 138 (295 lbs)

The Hammer Strength Select Pectoral Fly/Rear Deltoid is a fundamental part of the strength training progression.
Cables :- 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications
Instructional Placards :- Easy-to-follow instructions illustrate proper use and muscles trained , Axis of rotation marked with red indicator to help cue correct alignment
Cushioning :- Pads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability
Shrouds :- Standard rear shroud on SE models , Optional full front shroud on SE models
Weight Plates And Guide Rods :- Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings , 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss, Drop down incremental weight system (standard on SE models)
Adjustments :- Roller mechanism on seat adjustment provides smooth operation
Foot Platforms :- Polyethylene spray-coated for impact, corrosion, and abrasion resistance
Frame Description :- Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity
Hand Grips :- Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant
Dimensions (L x W x H) :- 49 in x 56 in x 71 in (125 cm x 143 cm x 181 cm)
Weight :- 580 lb (264 kg)
Weight Stack Weight :- In Kgs 138 (295 Lbs)

The Hammer Strength Select Chest Press is a fundamental part of the strength training progression. The pressing arm adjusts in five positions for multiple ranges of motion.
Cables :- 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications
Instructional Placards :- Easy-to-follow instructions illustrate proper use and muscles trained, Axis of rotation marked with red indicator to help cue correct alignment
Belts and Pulleys :- 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings
Cushioning :- Pads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability, Standard rear shroud on SE models,Optional full front shroud on SE models
Weight Plates And Guide Rods :- Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings , 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss, Drop down incremental weight system (standard on SE models)
Adjustments :- Roller mechanism on seat adjustment provides smooth operation
Foot Platforms :- Polyethylene spray-coated for impact, corrosion, and abrasion resistance
Frame Description :- Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity
Hand Grips :- Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant
Dimensions (L x W x H) :- 41 in x 57 in x 64 in (105 cm x 145 cm x 163 cm)
Weight :- 560 lb (255 kg)
Weight Stack Weight :- In Kgs 138 (295 lbs)

The Hammer Strength Select Back Extension is a fundamental part of the strength training progression.
Cables :- 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications
Instructional Placards :- Easy-to-follow instructions illustrate proper use and muscles trained, Axis of rotation marked with red indicator to help cue correct alignment
Belts and Pulleys :- 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings
Cushioning :- Pads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability, Standard rear shroud on SE models,Optional full front shroud on SE models
Weight Plates And Guide Rods :- Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings , 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss, Drop down incremental weight system (standard on SE models)
Adjustments :- Roller mechanism on seat adjustment provides smooth operation
Foot Platforms :- Polyethylene spray-coated for impact, corrosion, and abrasion resistance
Frame Description :- Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity
Hand Grips :- Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant
Dimensions (L x W x H) :- 46 in x 40 in x 55 in (117 cm x 102 cm x 140 cm)
Weight :- 560 lb (255 kg)
Weight Stack Weight :- In Kgs 138 (295 lbs)