The Hammer Strength Select Leg Extension is a fundamental part of the strength training progression. All adjustments are accessible from the seated position, and the adjustable start position provides five different starting points.
Cables :- 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications
Instructional Placards :- Easy-to-follow instructions illustrate proper use and muscles trained, Axis of rotation marked with red indicator to help cue correct alignment
Belts and Pulleys :- 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings
Cushioning :- Pads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability
Shrouds :- Standard rear shroud on SE models,Optional full front shroud on SE models
Weight Plates And Guide Rods :- Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings , 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss, Drop down incremental weight system (standard on SE models)
Adjustments :- Roller mechanism on seat adjustment provides smooth operation
Foot Platforms :- Polyethylene spray-coated for impact, corrosion, and abrasion resistance
Frame Description :- Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity
Hand Grips :- Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant
Dimensions (L x W x H) :-47 in x 41 in x 64 in (120 cm x 105 cm x 163 cm)
Weight :- 570 lb (259 kg)
Weight Stack Weight :- In Kgs 138 (295 lbs)

The Hammer Strength Select Leg Curl is a fundamental part of the strength training progression. Divergent angle between hip and chest pads minimizes lower-back stress, and adjustable start position provides five different starting points. The 22 pieces in the Hammer Strength Select line provide an inviting introduction to Hammer Strength equipment.

• Size (L x W x H): 65" x 39" x 55" (metric cm: 165 x 99 x 140)

• Recommended Live Area: 107" x 63" x 55" (metric cm: 272 x 160 x 140)

• Machine Weight: 475 lb (216 kg)

• Weight Stack(s): 200 lb (95 kg)

• Max User Weight: 300 lb (136 kg)

• Cables: 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications

• Instructional Placards: Easy-to-follow instructions illustrate proper use and muscles trained; Axis of rotation marked with red indicator to help cue correct alignment

• Belts and Pulleys: 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings

• Cushioning: Pads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability

• Shrouds: Standard rear shroud on SE models; Optional full front shroud on SE models

• Weight Plates and Guide Rods: Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings; 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss; Drop down incremental weight system (standard on SE models)

• Adjustments: Roller mechanism on seat adjustment provides smooth operation

• Foot Platforms: Polyethylene spray-coated for impact, corrosion, and abrasion resistance

• Frame Description: Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity

• Hand Grips: Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant

The Hammer Strength Select Hip and Glute is a fundamental part of the strength training progression. Combo machine with a bidirectional cam system that has immediate resistance pick-up for high-speed training.
Cables :- 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications
Instructional Placards :- Easy-to-follow instructions illustrate proper use and muscles trained, Axis of rotation marked with red indicator to help cue correct alignment
Belts and Pulleys :- 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings
Cushioning :- Pads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability
Shrouds :- Standard rear shroud on SE models,Optional full front shroud on SE models
Weight Plates And Guide Rods :- Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings , 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss, Drop down incremental weight system (standard on SE models)
Adjustments :- Roller mechanism on seat adjustment provides smooth operation
Foot Platforms :- Polyethylene spray-coated for impact, corrosion, and abrasion resistance
Frame Description :- Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity
Hand Grips :- Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant
Dimensions (L x W x H) :-65 in x 39 in x 72 in (166 cm x 100 cm x 183 cm)
Weight :- 725 lb (329 kg)
Weight Stack Weight :- In Kgs 138 (295 lbs)

The Hammer Strength Select Horizontal Calf is a fundamental part of the strength training progression. Force is transmitted through the hips to eliminate spinal compression, and the back pad is adjustable to fit all exercisers.
Cables :- 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications
Instructional Placards :- Easy-to-follow instructions illustrate proper use and muscles trained, Axis of rotation marked with red indicator to help cue correct alignment
Belts and Pulleys :- 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings
Cushioning :- Pads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability
Shrouds :- Standard rear shroud on SE models,Optional full front shroud on SE models
Weight Plates And Guide Rods :- Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings , 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss, Drop down incremental weight system (standard on SE models)
Adjustments :- Roller mechanism on seat adjustment provides smooth operation
Foot Platforms :- Polyethylene spray-coated for impact, corrosion, and abrasion resistance
Frame Description :- Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity
Hand Grips :- Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant
Dimensions (L x W x H) :-61 in x 32 in x 55 in (155 cm x 82 cm x 140 cm)
Weight :- 690 lb (313 kg)
Weight Stack Weight :- In Kgs 195 390 lbs)

The Hammer Strength Select Hip Abduction is a fundamental part of the strength training progression. The ratchet mechanism allows exercisers to adjust in 10-degree increments, and the kneepads and dual foot positions provide leg support around the knees.
Cables :- 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications
Instructional Placards :- Easy-to-follow instructions illustrate proper use and muscles trained, Axis of rotation marked with red indicator to help cue correct alignment
Belts and Pulleys :- 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings
Cushioning :- Pads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability
Shrouds :- Standard rear shroud on SE models,Optional full front shroud on SE models
Weight Plates And Guide Rods :- Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings , 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss, Drop down incremental weight system (standard on SE models)
Adjustments :- Roller mechanism on seat adjustment provides smooth operation
Foot Platforms :- Polyethylene spray-coated for impact, corrosion, and abrasion resistance
Frame Description :- Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity
Hand Grips :- Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant
Dimensions (L x W x H) :-61 in x 26 in x 55 in (155 cm x 67 cm x 140 cm)
Weight :- 575 lb (261 kg)
Weight Stack Weight :- In Kgs 138 (295 lbs)

The Hammer Strength Select Fixed Pulldown is a fundamental part of the strength training progression. Its defined path of motion is ideal for circuit training, and the angled seat and handgrips encourage proper exercise position.
Cables :- 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications
Instructional Placards :- Easy-to-follow instructions illustrate proper use and muscles trained, Axis of rotation marked with red indicator to help cue correct alignment
Belts and Pulleys :- 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings
Cushioning :- Pads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability
Shrouds :- Standard rear shroud on SE models,Optional full front shroud on SE models
Weight Plates And Guide Rods :- Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings , 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss, Drop down incremental weight system (standard on SE models)
Adjustments :- Roller mechanism on seat adjustment provides smooth operation
Foot Platforms :- Polyethylene spray-coated for impact, corrosion, and abrasion resistance
Frame Description :- Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity
Hand Grips :- Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant
Dimensions (L x W x H) :- 58 in x 55 in x 73 in (148 cm x 140 cm x 186 cm)
Weight :- 620 lb (282 kg)
Weight Stack Weight :- In Kgs 138 (295 lbs)

The Hammer Strength Select Pectoral Fly/Rear Deltoid is a fundamental part of the strength training progression.
Cables :- 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications
Instructional Placards :- Easy-to-follow instructions illustrate proper use and muscles trained , Axis of rotation marked with red indicator to help cue correct alignment
Cushioning :- Pads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability
Shrouds :- Standard rear shroud on SE models , Optional full front shroud on SE models
Weight Plates And Guide Rods :- Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings , 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss, Drop down incremental weight system (standard on SE models)
Adjustments :- Roller mechanism on seat adjustment provides smooth operation
Foot Platforms :- Polyethylene spray-coated for impact, corrosion, and abrasion resistance
Frame Description :- Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity
Hand Grips :- Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant
Dimensions (L x W x H) :- 49 in x 56 in x 71 in (125 cm x 143 cm x 181 cm)
Weight :- 580 lb (264 kg)
Weight Stack Weight :- In Kgs 138 (295 Lbs)

The Hammer Strength Select Chest Press is a fundamental part of the strength training progression. The pressing arm adjusts in five positions for multiple ranges of motion.
Cables :- 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications
Instructional Placards :- Easy-to-follow instructions illustrate proper use and muscles trained, Axis of rotation marked with red indicator to help cue correct alignment
Belts and Pulleys :- 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings
Cushioning :- Pads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability, Standard rear shroud on SE models,Optional full front shroud on SE models
Weight Plates And Guide Rods :- Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings , 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss, Drop down incremental weight system (standard on SE models)
Adjustments :- Roller mechanism on seat adjustment provides smooth operation
Foot Platforms :- Polyethylene spray-coated for impact, corrosion, and abrasion resistance
Frame Description :- Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity
Hand Grips :- Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant
Dimensions (L x W x H) :- 41 in x 57 in x 64 in (105 cm x 145 cm x 163 cm)
Weight :- 560 lb (255 kg)
Weight Stack Weight :- In Kgs 138 (295 lbs)

The Hammer Strength Select Back Extension is a fundamental part of the strength training progression.
Cables :- 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications
Instructional Placards :- Easy-to-follow instructions illustrate proper use and muscles trained, Axis of rotation marked with red indicator to help cue correct alignment
Belts and Pulleys :- 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings
Cushioning :- Pads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability, Standard rear shroud on SE models,Optional full front shroud on SE models
Weight Plates And Guide Rods :- Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings , 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss, Drop down incremental weight system (standard on SE models)
Adjustments :- Roller mechanism on seat adjustment provides smooth operation
Foot Platforms :- Polyethylene spray-coated for impact, corrosion, and abrasion resistance
Frame Description :- Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity
Hand Grips :- Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant
Dimensions (L x W x H) :- 46 in x 40 in x 55 in (117 cm x 102 cm x 140 cm)
Weight :- 560 lb (255 kg)
Weight Stack Weight :- In Kgs 138 (295 lbs)

The Hammer Strength Select Biceps Curl is a fundamental part of the strength training progression. Arm pads are angled for stability and unwanted shoulder movement.
Cables :- 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications
Instructional Placards :- Easy-to-follow instructions illustrate proper use and muscles trained, Axis of rotation marked with red indicator to help cue correct alignment
Belts and Pulleys :- 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings
Cushioning :- Pads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability, Standard rear shroud on SE models,Optional full front shroud on SE models
Weight Plates And Guide Rods :- Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings , 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss, Drop down incremental weight system (standard on SE models)
Adjustments :- Roller mechanism on seat adjustment provides smooth operation
Foot Platforms :- Polyethylene spray-coated for impact, corrosion, and abrasion resistance
Frame Description :- Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity
Hand Grips :- Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant
Dimensions (L x W x H) :- 45 in x 41 in x 55 in (115 cm x 105 cm x 140 cm)
Weight :- 450 lb (205 kg)
Weight Stack Weight :- In Kgs 95 (200 lbs)

The Hammer Strength Select Assist Dip is a fundamental part of the strength training progression. Foldable kneepads give the option for unassisted training, and multi-position handles allow exercise variation.
Cables :- 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications
Instructional Placards :- Easy-to-follow instructions illustrate proper use and muscles trained, Axis of rotation marked with red indicator to help cue correct alignment
Belts and Pulleys :- 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings
Cushioning :- Pads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability, Standard rear shroud on SE models,Optional full front shroud on SE models
Weight Plates And Guide Rods :- Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings , 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss, Drop down incremental weight system (standard on SE models)
Adjustments :- Roller mechanism on seat adjustment provides smooth operation
Foot Platforms :- Polyethylene spray-coated for impact, corrosion, and abrasion resistance
Frame Description :- Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity
Hand Grips :- Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant
Dimensions (L x W x H) :- 46 in x 45 in x 87 in (117 cm x 115 cm x 221 cm)
Weight :- 655 lb (298 kg)
Weight Stack Weight :- In Kgs 82 (175 lbs)

The Hammer Strength Select Abdominal Crunch is a fundamental part of the strength training progression.
Cables :- 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications
Instructional Placards :- Easy-to-follow instructions illustrate proper use and muscles trained, Axis of rotation marked with red indicator to help cue correct alignment
Belts and Pulleys :- 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings
Cushioning :- Pads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability, Standard rear shroud on SE models,Optional full front shroud on SE models
Weight Plates And Guide Rods :- Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings , 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss, Drop down incremental weight system (standard on SE models)
Adjustments :- Roller mechanism on seat adjustment provides smooth operation
Foot Platforms :- Polyethylene spray-coated for impact, corrosion, and abrasion resistance
Frame Description :- Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity
Hand Grips :- Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant
Dimensions (L x W x H) :- 62 in x 35 in x 56 in (158 cm x 89 cm x 143 cm)
Weight :- 400 lb (182 kg)
Weight Stack Weight :- In Kgs 95 (200 lbs)

The HD Elite Row can be customized with your combo rack or used as a stand-alone unit. The fold in seat allows you to reduce footprint while still offering the same heavy-duty strength as Hammer Strength rowers.
Dimensions (L x W x H) :- 62.5" L x 36.5" W x 96.5" H
Weight :- 642 lbs (292 kg)

The HD Elite Dual Pulldown/Row alternates between two classic movements with one simple cable adjustment and position change. Available as a stand-alone station or part of a combo rack, it provides added versatility to any weight room with the rugged performance of HD Elite.
Dimensions (L x W x H) :- 64.3" L x 47.6" W x 96.4" H
Weight :- 724 lbs (328 kg)