The Plated-Loaded Iso-Lateral Leg Curl was blueprinted from human movement. Separate weight horns engage independent diverging and converging motions for equal strength development and muscle stimulation variety.
Standard Weight Horns :- 4
Starting Resistance :- 4 lbs (1.8 kg)
Frame Description :- 11-gauge steel frame ensures maximum structural integrity , Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability
Dimensions (L x W x H) :-53 in x 82 in x 42 in (134 cm x 207 cm x 106 cm)
Weight :- 285 lb (130 kg)

The Plate-Loaded Iso-Lateral Incline Press was blueprinted from human movement. Separate weight horns engage independent diverging and converging motions for equal strength development and muscle stimulation variety.
Standard Weight Horns :- 4
Starting Resistance :- 8 lbs (3.6 kg)
Frame Description :- 11-gauge steel frame ensures maximum structural integrity , Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability
Dimensions (L x W x H) :-53 in x 51 in x 75 in (134 cm x 129 cm x 190 cm)
Weight :- 325 lb (148 kg)

The Plate-Loaded Iso-Lateral High Row was blueprinted from human movement. Separate weight horns engage independent diverging and converging motions for equal strength development and muscle stimulation variety.
Standard Weight Horns :- 4
Starting Resistance :- 2 lbs (0.9 kg)
Frame Description :- 11-gauge steel frame ensures maximum structural integrity , Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability
Dimensions (L x W x H) :-57 in x 66 in x 88 in (144 cm x 168 cm x 223 cm)
Weight :- 330 lb (150 kg)

The Plate-Loaded Iso-Lateral Super Incline Press was blueprinted from human movement. Separate weight horns engage independent diverging and converging motions for equal strength development and muscle stimulation variety.
Standard Weight Horns :- 6
Starting Resistance :- 11 lbs (5 kg)
Frame Description :- 11-gauge steel frame ensures maximum structural integrity , Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability
Dimensions (L x W x H) :-59 in x 58 in x 61 in (149 cm x 146 cm x 156 cm)
Weight :- 360 lb (164 kg)

The Plate-Loaded Iso-Lateral D.Y. Row was blueprinted from human movement. Separate weight horns engage independent diverging and converging motions for equal strength development and muscle stimulation variety.
Standard Weight Horns :- 6
Starting Resistance :- 3 lbs (1 kg)
Frame Description :- 11-gauge steel frame ensures maximum structural integrity , Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability
Dimensions (L x W x H) :- 60 in x 60 in x 85 in (153 cm x 152 cm x 216 cm)
Weight :- 360 lb (164 kg)

The Plate-Loaded Iso-Lateral Decline Press was blueprinted from human movement. Separate weight horns engage independent diverging and converging motions for equal strength development and muscle stimulation variety.
Standard Weight Horns :- 6
Starting Resistance :- 6 lbs (3 kg) per workarm
Frame Description :- 11-gauge steel frame ensures maximum structural integrity , Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability
Dimensions (L x W x H) :- 66 in x 67 in x 67 in (169 cm x 170 cm x 171 cm)
Weight :- 315 lb (143 kg)

The Plate-Loaded Iso-Lateral Chest/Back was blueprinted from human movement. Separate weight horns engage independent diverging and converging motions for equal strength development and muscle stimulation variety.
Standard Weight Horns :- 6
Starting Resistance :- 7 lbs (3.2 kg)
Frame Description :- 11-gauge steel frame ensures maximum structural integrity , Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability
Dimensions (L x W x H) :- 54 in x 75 in x 83 in (136 cm x 191 cm x 212 cm)
Weight :- 390 lb (177 kg)

The Hammer Strength Select Triceps Extension is a fundamental part of the strength training progression. The angled seat and arm pads enhance stability during exercise, and the handle pivots automatically accommodate different forearm lengths.
Cables :- 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications
Instructional Placards :- Easy-to-follow instructions illustrate proper use and muscles trained, Axis of rotation marked with red indicator to help cue correct alignment
Belts and Pulleys :- 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings
Cushioning :- Pads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability
Shrouds :- Standard rear shroud on SE models,Optional full front shroud on SE models
Weight Plates And Guide Rods :- Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings , 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss, Drop down incremental weight system (standard on SE models)
Adjustments :- Roller mechanism on seat adjustment provides smooth operation
Foot Platforms :- Polyethylene spray-coated for impact, corrosion, and abrasion resistance
Frame Description :- Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity
Hand Grips :- Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant
Dimensions (L x W x H) :-45 in x 44 in x 55 in (115 cm x 112 cm x 140 cm)
Weight :-470 lb (214 kg)
Weight Stack Weight :- In Kgs 95 (200 lbs)

The Hammer Strength Select Shoulder Press is a fundamental part of the strength training progression. Seat position provides range-of-motion adjustments, and choice of grips gives users individual preferences.
Cables :- 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications
Instructional Placards :- Easy-to-follow instructions illustrate proper use and muscles trained, Axis of rotation marked with red indicator to help cue correct alignment
Belts and Pulleys :- 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings
Cushioning :- Pads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability
Shrouds :- Standard rear shroud on SE models,Optional full front shroud on SE models
Weight Plates And Guide Rods :- Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings , 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss, Drop down incremental weight system (standard on SE models)
Adjustments :- Roller mechanism on seat adjustment provides smooth operation
Foot Platforms :- Polyethylene spray-coated for impact, corrosion, and abrasion resistance
Frame Description :- Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity
Hand Grips :- Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant
Dimensions (L x W x H) :-60 in x 56 in x 64 in (153 cm x 143 cm x 163 cm)
Weight :- 520 lb (236 kg)
Weight Stack Weight :- In Kgs 95 (200 lbs)

The Smith Machine bar path follows a seven-degree angle, which is the free weight motion of Olympic lifting — to give you the same workout environment as Olympic athletes.
Adjustments :- No
Frame Description :- 11-gauge steel frame ensures maximum structural integrity, Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability
Dimensions (L x W x H) :- 50 in x 86.5 in x 93 in (127 cm x 220 cm x 237 cm)
Weight :- 635 lb (289 kg)

The Hammer Strength Select Seated Leg Press is a fundamental part of the strength training progression. It has biomechanically sound positioning and pressing angles, and the maintenance-free, stainless steel rails offer smooth motion.
Cables :- 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications
Instructional Placards :- Easy-to-follow instructions illustrate proper use and muscles trained, Axis of rotation marked with red indicator to help cue correct alignment
Belts and Pulleys :- 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings
Cushioning :- Pads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability
Shrouds :- Standard rear shroud on SE models,Optional full front shroud on SE models
Weight Plates And Guide Rods :- Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings , 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss, Drop down incremental weight system (standard on SE models)
Adjustments :- Roller mechanism on seat adjustment provides smooth operation
Foot Platforms :- Polyethylene spray-coated for impact, corrosion, and abrasion resistance
Frame Description :- Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity
Hand Grips :- Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant
Dimensions (L x W x H) :-79 in x 40 in x 71 in (201 cm x 102 cm x 181 cm)
Weight :- 810 lb (368 kg)
Weight Stack Weight :- In Kgs 195 (390 lbs)

The Hammer Strength Select Seated Leg Curl is a fundamental part of the strength training progression. Adjustable back and thigh pads for better alignment and stabilization, and adjustable start position provides five different starting points.
Cables :- 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications
Instructional Placards :- Easy-to-follow instructions illustrate proper use and muscles trained, Axis of rotation marked with red indicator to help cue correct alignment
Belts and Pulleys :- 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings
Cushioning :- Pads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability
Shrouds :- Standard rear shroud on SE models,Optional full front shroud on SE models
Weight Plates And Guide Rods :- Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings , 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss, Drop down incremental weight system (standard on SE models)
Adjustments :- Roller mechanism on seat adjustment provides smooth operation
Foot Platforms :- Polyethylene spray-coated for impact, corrosion, and abrasion resistance
Frame Description :- Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity
Hand Grips :- Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant
Dimensions (L x W x H) :-55 in x 34 in x 55 in (140 cm x 87 cm x 140 cm)
Weight :- 515 lb (234 kg)
Weight Stack Weight :- In Kgs 138 (295 lbs)

The Hammer Strength Select Standing Calf is a fundamental part of the strength training progression. Nine pad height positions accommodate all users, and contoured non-slip foot plates allow users’ ankles to move in a full range-of-motion.
Cables :- 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications
Instructional Placards :- Easy-to-follow instructions illustrate proper use and muscles trained, Axis of rotation marked with red indicator to help cue correct alignment
Belts and Pulleys :- 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings
Cushioning :- Pads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability
Shrouds :- Standard rear shroud on SE models,Optional full front shroud on SE models
Weight Plates And Guide Rods :- Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings , 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss, Drop down incremental weight system (standard on SE models)
Adjustments :- Roller mechanism on seat adjustment provides smooth operation
Foot Platforms :- Polyethylene spray-coated for impact, corrosion, and abrasion resistance
Frame Description :- Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity
Hand Grips :- Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant
Dimensions (L x W x H) :-58 in x 45 in x 71.5 in (148 cm x 115 cm x 182 cm)
Weight :- 680 lb (309 kg)
Weight Stack Weight :- In Kgs 195 (390 lbs)

The Hammer Strength Select Seated Row is a fundamental part of the strength training progression. The overhead pivot creates a natural arc of motion, and multiple hand positions provide variety for mid- or upper-back exercises.
Cables :- 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications
Instructional Placards :- Easy-to-follow instructions illustrate proper use and muscles trained, Axis of rotation marked with red indicator to help cue correct alignment
Belts and Pulleys :- 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings
Cushioning :- Pads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability
Shrouds :- Standard rear shroud on SE models,Optional full front shroud on SE models
Weight Plates And Guide Rods :- Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings , 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss, Drop down incremental weight system (standard on SE models)
Adjustments :- Roller mechanism on seat adjustment provides smooth operation
Foot Platforms :- Polyethylene spray-coated for impact, corrosion, and abrasion resistance
Frame Description :- Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity
Hand Grips :- Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant
Dimensions (L x W x H) :-52 in x 34 in x 71 in (133 cm x 87 cm x 181 cm)
Weight :- 590 lb (268 kg)
Weight Stack Weight :- In Kgs 138 295 lbs)

The Hammer Strength Select Lat Pulldown is a fundamental part of the strength training progression. Thigh pads easily adjust to provide stability and comfort, and the straight-bar has angled ends to ensure correct arm and wrist positioning during workouts.
Cables :- 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications
Instructional Placards :- Easy-to-follow instructions illustrate proper use and muscles trained, Axis of rotation marked with red indicator to help cue correct alignment
Belts and Pulleys :- 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings
Cushioning :- Pads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability
Shrouds :- Standard rear shroud on SE models,Optional full front shroud on SE models
Weight Plates And Guide Rods :- Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings , 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss, Drop down incremental weight system (standard on SE models)
Adjustments :- Roller mechanism on seat adjustment provides smooth operation
Foot Platforms :- Polyethylene spray-coated for impact, corrosion, and abrasion resistance
Frame Description :- Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity
Hand Grips :- Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant
Dimensions (L x W x H) :-54 in x 33 in x 89 in (138 cm x 84 cm x 227 cm)
Weight :- 545 lb (248 kg)
Weight Stack Weight :- In Kgs 138 295 lbs)

The Hammer Strength Select Lateral Raise is a fundamental part of the strength training progression. Pad positions are optimized for middle deltoid stimulation, and pivoting handles accommodate users of all sizes.
Cables :- 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications
Instructional Placards :- Easy-to-follow instructions illustrate proper use and muscles trained, Axis of rotation marked with red indicator to help cue correct alignment
Belts and Pulleys :- 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings
Cushioning :- Pads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability
Shrouds :- Standard rear shroud on SE models,Optional full front shroud on SE models
Weight Plates And Guide Rods :- Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings , 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss, Drop down incremental weight system (standard on SE models)
Adjustments :- Roller mechanism on seat adjustment provides smooth operation
Foot Platforms :- Polyethylene spray-coated for impact, corrosion, and abrasion resistance
Frame Description :- Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity
Hand Grips :- Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant
Dimensions (L x W x H) :-42 in x 37 in x 55 in (107 cm x 94 cm x 140 cm)
Weight :- 535 lb (243 kg)
Weight Stack Weight :- In Kgs 95 (200 lbs)