The Life Fitness Signature Series Plate-Loaded High Row uses diverging and iso-lateral movements for a natural downward pulling motion and equal strength development.
Plate Capacity :-5-45 lb (4-25 kg) plates per weight rod
Starting Resistance :- 3 lbs (1 kg)
Adjustments :- Spring assist to (where applicable) improve ease of use on adjustments
Cushioning :- Contoured cushions utilize a molded foam for superior comfort and durability,Pads have plastic backers to protect and increase durability
Frame Description :- 11-gauge steel frame ensures maximum structural integrity; Standard rubber feet protect base of the frame and prevent the machine from slipping; Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Urethane paint guards to protect paint
Hand Grips :- Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant
Instructional Placards :- Easy-to-follow instructions illustrate proper use and muscles trained
Dimensions (L x W x H) :- 73 in x 66 in x 76 in (186 cm x 168 cm x 194 cm)
Weight :- 409 lb (186 kg)

The Signature Series Seated Dip has front and rear facing seat position that allows easy access to all users. It also features dependent work arm movements for increased control.
Plate Capacity :-5-45 lb (4-25 kg) plates per weight rod
Starting Resistance :- 3 lbs (1 kg)
Adjustments :- Spring assist to (where applicable) improve ease of use on adjustments
Cushioning :- Contoured cushions utilize a molded foam for superior comfort and durability,Pads have plastic backers to protect and increase durability
Frame Description :- 11-gauge steel frame ensures maximum structural integrity; Standard rubber feet protect base of the frame and prevent the machine from slipping; Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Urethane paint guards to protect paint
Hand Grips :- Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant
Instructional Placards :- Easy-to-follow instructions illustrate proper use and muscles trained
Dimensions (L x W x H) :- 69 in x 41 in x 37 in (176 cm x 105 cm x 94 cm)
Weight :- 276 lb (126 kg)

The Signature Series Decline Chest Press has an upright body position that is comfortable and non-intimidating. It also features converging and iso-lateral movements for a natural forward pressing motion and equal strength development.
Plate Capacity :-5-45 lb (4-25 kg) plates per weight rod
Standard Weight Horns:- 6
Starting Resistance :- 6 lbs (3 kg) per workarm
Adjustments :- Spring assist to (where applicable) improve ease of use on adjustments
Cushioning :- Contoured cushions utilize a molded foam for superior comfort and durability,Pads have plastic backers to protect and increase durability
Frame Description :- 11-gauge steel frame ensures maximum structural integrity; Standard rubber feet protect base of the frame and prevent the machine from slipping; Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Urethane paint guards to protect paint
Hand Grips :- Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant
Instructional Placards :- Easy-to-follow instructions illustrate proper use and muscles trained
Dimensions (L x W x H) :- 51 in x 69 in x 76 in (130 cm x 176 cm x 194 cm)
Weight :- 340 lb (155 kg)

The Signature Series Calf Raise offers angled handles for user comfort. The intuitive pull-pin thigh pad adjusts to accommodate various users, and the design emphasizes the soleus muscle.
Plate Capacity :-4-45 lb (3-25 kg) plates per weight rod
Starting Resistance :- 95 lbs (43 kg)
Adjustments :- Spring assist to (where applicable) improve ease of use on adjustments
Cushioning :- Contoured cushions utilize a molded foam for superior comfort and durability,Pads have plastic backers to protect and increase durability
Frame Description :- 11-gauge steel frame ensures maximum structural integrity; Standard rubber feet protect base of the frame and prevent the machine from slipping; Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Urethane paint guards to protect paint
Hand Grips :- 11-gauge steel frame ensures maximum structural integrity; Standard rubber feet protect base of the frame and prevent the machine from slipping; Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Urethane paint guards to protect paint
Instructional Placards :- Easy-to-follow instructions illustrate proper use and muscles trained
Dimensions (L x W x H) :- 61 in x 29 in x 42 in (155 cm x 74 cm x 107 cm)
Weight :- 182 lb (83 kg)

The Signature Series Biceps Curl uses the traditional preacher curl position, rotating handles and angled arm pad to accommodate different users while limiting unwanted shoulder movement.
DIAMANESIONS:- 110 cm x 140 cm x 120 cm
UNIT WEIGHT :- 125Kg

The Signature Series Olympic Weight Tree employs six weight horns for simple weight storage. It also has labels for correct weight placement.
Adjustments :- No
Cushioning :- Contoured cushions utilize a molded foam for superior comfort and durability ,Pads have plastic backers to protect and increase durability
Frame Description :- 11-gauge steel frame ensures maximum structural integrity; Standard rubber feet protect base of the frame and prevent the machine from slipping; Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Urethane paint guards to protect paint.
Hand Grips :- Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant
Dimensions (L x W x H) :- 23 in x 27 in x 37 in (59 cm x 69 cm x 94 cm)
Weight :- 95 lb (44 kg)

The Signature Leg Raise has a large, spherical back pad to ensure optimal stabilization. Signature Series premium benches and racks seamlessly integrate with other pieces of the line to complete a family of high-quality strength training products.
Adjustments :- No
Cushioning :- Contoured cushions utilize a molded foam for superior comfort and durability
Pads have plastic backers to protect and increase durability
Frame Description :- 11-gauge steel frame ensures maximum structural integrity; Standard rubber feet protect base of the frame and prevent the machine from slipping; Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Urethane paint guards to protect paint
Hand Grips :- Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant
DIMENSIONS :- (L x W x H) 46 in x 33 in x 64 in (117 cm x 84 cm x 163 cm)
UNIT WEIGHT :-140 lb (64 kg)

The Signature Adjustable Decline/Abdominal Crunch easily adjusts to four different angles for varying levels of workout difficulty. Signature Series premium benches and racks seamlessly integrate with other pieces of the line to complete a family of high-quality strength-training products.

• Adjustments: Spring assisted seat adjustments

• Footprint (L x W x H): 61” x 44” x 32” (metric cm: 155 x 112 x 81)

• Recommended Live Area (L x W x H): 106” x 73” x 32”Metric(cm): 269 x 185 x 81

• Machine Weight: 135 lbs (61 kg)

• Max Training Weight: 600 lbs (272 kg)

• Head Pad Size (at the widest point of the contoured sides): 10” x 9” (25.4 x 22.8 cm)

• Back Pad Size (at the widest point of the contoured sides): 36” x 11” (91.4 x 27.9 cm)

The Optima Series Shoulder Press is designed to specifically target the shoulders and improve upper body strength. The sleek design is inviting to exercisers of all fitness levels and abilities.
Cables :- 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications
Instructional Placards:- Easy-to-follow pictorial instructions illustrate proper user position without words
Belts and Pulleys :- 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings
Shrouds :- Optional full front and rear shrouds
Weight Plates And Guide Rods :- Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings, 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss, Chrome plated solid steel guide rods for smooth motion.
Adjustments :- Simple easy to use chrome plated tube-in-tube adjustments for durability
Frame Description:- 11-gauge steel frame ensures maximum structural integrity; Standard rubber feet protect base of the frame and prevent the machine from slipping; Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability
Hand Grips :- Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant; Handles utilize an aluminum cap for durability
Dimensions (L x W x H) :-61 in x 55 in x 57 in (155 cm x 140 cm x 145 cm)
Weight :-493 lb (224 kg)
Weight Stack Weight :- In Kg-92 (Lbs 202)

The Optima Series Smith Rack combines beginner-friendly weight stabilization of a Smith machine with the advanced options of unsupported Olympic bar training. The sleek design is inviting to all exercisers.
Adjustments :- No
Frame Description :- 11-gauge steel frame ensures maximum structural integrity
Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability
Standard rubber feet protect base of the frame and prevent the machine from slipping
Suspension Training :- Manufacturer REQUIRES that this product be secured to the floor when used with body weight strap training products to stabilize and eliminate rocking or tipping over
Dimensions (L x W x H) :- 51 in x 73 in x 88 in (130 cm x 186 cm x 224 cm)
Weight :- 398 lb (181 kg)

The Optima Series Lat Pulldown/Low Row accommodates two exercises that target the entire back and rear shoulder muscle groups. The clean, inviting look is appealing to all exercisers.
Cables :- 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications
Instructional Placards:- Easy-to-follow pictorial instructions illustrate proper user position without words
Belts and Pulleys :- 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings
Shrouds :- Optional full front and rear shrouds
Weight Plates And Guide Rods :- Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings, 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss, Chrome plated solid steel guide rods for smooth motion.
Adjustments :- Simple easy to use chrome plated tube-in-tube adjustments for durability
Frame Description:- 11-gauge steel frame ensures maximum structural integrity; Standard rubber feet protect base of the frame and prevent the machine from slipping; Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability
Hand Grips :- Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant; Handles utilize an aluminum cap for durability
Dimensions (L x W x H) :-79 in x 50 in x 87 in (201 cm x 127 cm x 221 cm)
Weight :-440 lb (200 kg)
Weight Stack Weight :- In Kg-92 (Lbs 202)

The Optima Series Leg Press offers an effective lower-body workout. The clean, inviting look of Optima Series selectorized strength equipment makes it a great solution for any facility.
Cables :- 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications
Instructional Placards:- Easy-to-follow pictorial instructions illustrate proper user position without words
Belts and Pulleys :- 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings
Shrouds :- Optional full front and rear shrouds
Weight Plates And Guide Rods :- Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings, 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss, Chrome plated solid steel guide rods for smooth motion.
Adjustments :- Simple easy to use chrome plated tube-in-tube adjustments for durability
Frame Description:- 11-gauge steel frame ensures maximum structural integrity; Standard rubber feet protect base of the frame and prevent the machine from slipping; Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability
Hand Grips :- Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant; Handles utilize an aluminum cap for durability
Dimensions (L x W x H) :-81 in x 40 in x 69 in (206 cm x 102 cm x 176 cm)
Weight :-566 lb (257 kg)
Weight Stack Weight :- In Kg-101 (Lbs 222)

The Optima Series Leg Extension/Curl offers a two-in-one machine with easy transitions between hamstring and quadriceps workouts. The sleek design is inviting to exercisers of all fitness levels and abilities.
Cables :- 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications
Instructional Placards:- Easy-to-follow pictorial instructions illustrate proper user position without words
Belts and Pulleys :- 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings
Shrouds :- Optional full front and rear shrouds
Weight Plates And Guide Rods :- Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings, 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss, Chrome plated solid steel guide rods for smooth motion.
Adjustments :- Simple easy to use chrome plated tube-in-tube adjustments for durability
Frame Description:- 11-gauge steel frame ensures maximum structural integrity; Standard rubber feet protect base of the frame and prevent the machine from slipping; Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability
Hand Grips :- Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant; Handles utilize an aluminum cap for durability
Dimensions (L x W x H) :-64 in x 40 in x 57 in (163 cm x 102 cm x 145 cm)
Weight :-437 lb (199 kg)
Weight Stack Weight :- In Kg-92 (Lbs 202)

The Optima Series Leg Extension offers an effective lower-body workout. The clean, inviting look of Optima Series selectorized strength equipment makes it a great solution for any facility.
Cables :- 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications
Instructional Placards:- Easy-to-follow pictorial instructions illustrate proper user position without words
Belts and Pulleys :- 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings
Shrouds :- Optional full front and rear shrouds
Weight Plates And Guide Rods :- Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings, 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss, Chrome plated solid steel guide rods for smooth motion.
Adjustments :- Simple easy to use chrome plated tube-in-tube adjustments for durability
Frame Description:- 11-gauge steel frame ensures maximum structural integrity; Standard rubber feet protect base of the frame and prevent the machine from slipping; Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability
Hand Grips :- Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant; Handles utilize an aluminum cap for durability
Dimensions (L x W x H) :-59 in x 40 in x 57 in (150 cm x 102 cm x 145 cm)
Weight :-419 lb (191 kg)
Weight Stack Weight :- In Kg-92 (Lbs 202)

The Optima Series Leg Curl strengthens the hamstring muscles, employing a stomach-down position. The clean, inviting look of Optima Series selectorized strength equipment makes it a great solution for any facility.
Cables :- 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications
Instructional Placards:- Easy-to-follow pictorial instructions illustrate proper user position without words
Belts and Pulleys :- 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings
Shrouds :- Optional full front and rear shrouds
Weight Plates And Guide Rods :- Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings, 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss, Chrome plated solid steel guide rods for smooth motion.
Adjustments :- Simple easy to use chrome plated tube-in-tube adjustments for durability
Frame Description:- 11-gauge steel frame ensures maximum structural integrity; Standard rubber feet protect base of the frame and prevent the machine from slipping; Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability
Hand Grips :- Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant; Handles utilize an aluminum cap for durability
Dimensions (L x W x H) :-66 in x 66 in x 57 in (168 cm x 168 cm x 145 cm)
Weight :-425 lb (193 kg)
Weight Stack Weight :- In Kg-64 (Lbs 142)

The Optima Series Hip Abductor/Adductor offers swivel pads that allow exercisers to work both inner and outer thighs. The sleek design is inviting to exercisers of all fitness levels and abilities.
Cables :- 7x19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications
Instructional Placards:- Easy-to-follow pictorial instructions illustrate proper user position without words
Belts and Pulleys :- 4-1/2" (11 cm) and 6" (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings
Shrouds :- Optional full front and rear shrouds
Weight Plates And Guide Rods :- Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings, 7/16" (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss, Chrome plated solid steel guide rods for smooth motion.
Adjustments :- Simple easy to use chrome plated tube-in-tube adjustments for durability
Frame Description:- 11-gauge steel frame ensures maximum structural integrity; Standard rubber feet protect base of the frame and prevent the machine from slipping; Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability
Hand Grips :- Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant; Handles utilize an aluminum cap for durability
Dimensions (L x W x H) :-66 in x 66 in x 57 in (168 cm x 168 cm x 145 cm)
Weight :-425 lb (193 kg)
Weight Stack Weight :- In Kg-64 (Lbs 142)